EVK-SMART-BEE Evaluation Board
- Flexible prototyping vehicle
- Manufacturing test platform
- An "application ready" single board computer.
- Dimensions: 102mm x 145mm (L x W)
- Availability guaranteed until 2035
Feature Highlights

- Fix DC 5V Power input with 2-pin 5mm Terminal Block
- Accept 3.3V VDDIO SMARC 1.0 compliant module
- LVDS LCD backlight control signals
- RTC backup battery onboard
- Buzzer
- 18/24-bit single-channel LVDS
- 2 x 10/100Mbps RJ-45 connectors with magnets
- 1 x USB 2.0 host type A connectors, 1 x mini USB client connector
- 3 x RS232s (one can be configured as RS422/485), 1 x CAN Bus Header (Tranceiver on Board), 2 x I2Cs header, 2 x SPIs header, 1 x Buzzer, 12 x GPIOs Header, 1 x 4-wire resistive touch connector, 1 x 2x7-pin GPIO header
- 2.54mm Microphone input and Headphone output Header
- 1 x SDHC connector
- A single 4KB EEPROM is provided on I2C0 that holds the board information. This information includes board name, serial number, and revision information.
- 1 x external watchdog reset
- jumpers and switches for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection
- Form Factor: 3.5-inch SBC (102mm x 145mm, L x W)
Document Deliverable

- SMARC 1.0 Carrier Board Design Guide
- User's Manual
- Carrier Board Reference Schematics (pdf and OrCAD format)
- Carrier Board Schematics Checklist
- PinMux File